| Technical Specifications |
| 150Mbps N Wireless Access Point (WAP-6002) |
| LAN Specification |
Support standard IEEE802.3, IEEE 802.3u 10/100Base-TX, auto negotiation, auto
MDIX
InterfaceConnectorRJ45: Number of ports1
Standard100BASE-TX/10BASE-T Auto
Full Duplex/Half Duplex Auto
MDI/MDI-X change Auto MDI/MDI-X
Extended slot None |
| Recommended |
100BASE-TXCategory 5 or more
cable10BASE-TCategory 3x or more |
| Wireless LAN specification |
Support standard IEEE 802.11b/g and IEEE802.11n
Transfer rateIEEE802.11b11M/5.5M/2M/1M
IEEE802.11g54M/48M/36M/24M/18M/12M/11M/9M/6M TBD
IEEE802.11n 300M/270M/ 243M/240M/216M/180M/162M/
120M/108Mbps in 40Mhz mode
145M/130M/117M/104M/ 78 Mbps in 20Mhz mode |
| Bandwidth |
IEEE802.11b: Over 5Mbps
IEEE802.11g: Over 20Mbps
IEEE802.11n: Over 60Mbps (20Mhz mode) /100Mbps (40Mhz
mode). Depends on Clients |
| Number of channels |
IEEE802.11b:2.4GHz ~ 2.485GHz / 1 ~ 13ch
IEEE802.11g:2.4GHz ~ 2.485GHz / 1 ~ 13ch
IEEE802.11n:2.4GHz ~ 2.485GHz / 1 ~ 13ch |
| Transmission mode |
IEEE802.11b: CCK (11 Mbps, 5.5 Mbps) DQPSK (2 Mbps)
DBPSK (1 Mbps)
IEEE802.11g: OFDM
IEEE802.11n: OFDM |
| Modulation system |
IEEE802.11bDBPSK, DQPSK, CCK
IEEE802.11gBPSK, QPSK,16-QAM, 64-QAM, OFDM
IEEE802.11nBPSK, QPSK,16-QAM, 64-QAM, OFDM
CSMA/CA |
| Access method |
WEP (64/128) |
| Security |
WPA/WPA-PSK (Personal); WPA2/WPA2-PSK (Personal)
TKIP, AES
Stealth AP (Hidden ESSID)
MAC address filtering
WPS button support
Wireless client Isolation
802.1x with Radius
Infrastructure |
| Antenna power |
1.8dBi |
| Antenna type |
External detachable x 1 |
| PA RF power |
17dBm |
| Transmission range |
Receiver Sensitivity(Typical)
802.11g:10 % PER, 71 dBm @ 54 Mbps
802.11b: 8 % PER, 88 dBm @ 11 Mbps
Transmitter Output Power(Typical)
802.11g: 13~14 dBm
802.11b: 17~18 dBm
Operation Range
Indoor: approx.up to 50 meters
Outdoor: approx.up to 100 meters |
| Reset button |
Reset to Factory Push and hold on >5 seconds
Reboot Push and release |
| WPS |
Support Wi-Fi protected Security |
| Power unit |
DC 12 V/1A |
| Environmental condition |
Operating: Temperature 0 ~ 40°C/Humidity 85% or less(noncondensing)
Storage: Temperature 20 ~ 70°C/Humidity 95% or less (noncondensing) |