Recently Viewed Items

Clear this list

Newsletter

Abesco FP200 Fire Rated Expanding Foam


Description of Abesco FP200 Fire Rated Expanding Foam

Scroll to Pricing

Made to fill gaps, small openings, and crevices in and around fire rated walls and floors, the Abesco® FP200 uses polyurethane expanding foam which prohibits fire and smoke from spreading.

Aside from great fire protection, the Abesco fire rated foam offers an impressive insulation seal when working with wood, brick, aluminum, concrete, and steel.

One 24oz. (1) can covers approximately one (1) cubic Foot area.

Meets these independent testing standards:

*ASTM E-814 (UL 1479)- 2 hour fire resistant
*BS EN 1366-3
*BS476 part 20 - 4 hour fire resistance
*AS1530.4

Please click the "More Information" tab for additional data on this product.


Write a Review After receiving your order add a new product review here and receive 10% Off on your next order!!

Features and Benefits

  • Extremely versatile solution
  • 100% CFC Free
  • Excellent adhesion to most building substrates
  • Not compromised by moist and humid conditions.

Reviews

Abesco FP200 12/28/2012
Reviewed by: Ronald Sabin from Key West Florida.
Great stuff a little pricey though.
Architect 6/19/2012
Reviewed by: Jack Ablon from Killeen, Texas.
I am aware of FP200 because of my profession but, I use it because of one of my hobbies, Model Building. Large vinyl figure models need a filling preventing warpage in warm weather. FP200 does not generate heat as it cures so it is the perfect filler that will not damage models. The large can will probably do a dozen models. Get the small can if you only have 4 to 7 models to fill.


More Info

Technical Data Sheet
Material Safety Data Sheet

Physical Properties

Application temperature: min.+41F (surfaces), 68F-77F (can)
Track free time: 5 - 10 minute, depending of temp. and humidity
Cut time: 15-20 minute (1.2: Dia.), depending on temp. and humidity
Hardening time: 5 - 12 hours, depending on temp. and humidity
Water absorption: max. 2% vol.
Temperature resistance: -40 to +210F
Tensile strength: 0,071 - 0,076 MPa
Elongation at break: 15 - 20%
Flammability class: B1 according to DIN 4102, part 1
Storage: 9 months (+50F to +68F); can must be vertical

Pricing

Attention: This product is only shipped UPS Ground
please choose that option when checking out!

Quantity
Payment methods
Secure server