More Info
Click here to view Specification Chart
| ABRASION PROPERTIES |
| Abrasion Resistance |
Extremely High |
| Abrasion Test Machine |
Taber 5150 |
| Abrasion Test Wheel |
Calibrase H-18 |
| Abrasion Test Load |
500g |
| Room Temperature |
85°F |
| Humidity |
74% |
| Minimal Visible Wearing |
400 Test Cycles |
| Visible Wearing |
3,000 Test Cycles |
| Heavy Wear |
11,000 Test Cycles |
| Material Destroyed-Hole Through Material |
13,00 Test Cycles |
| Pre-Test Weight |
14,096 mg |
| Post-Test Weight |
11,705 mg |
| Test End Loss of Mass Point of Destruction |
2,391 mg |
| CHEMICAL RESISTANCE |
| Aromatic Solvents |
1 |
| Aliphatic Solvents |
1 |
| Chlorinated Solvents |
1 |
| Weak Bases |
1 |
| Salts |
1 |
| Strong Bases |
2 |
| Salt Water 0-S-1926 |
1 |
| Hydraulic Fluid MIL-H-5606 |
1 |
| Lube Oil MIL-L-7808 |
1 |
| De-Icing Fluid MIL-A-8243 |
1 |
| Strong Acids |
5 |
| Strong Oxidants |
5 |
| Esters/Keytones |
1 |
| UV Light |
2 |
| Petroleum |
3 |
| Fungus ASTM D-2863 |
2 |
| Outgassing |
High |
| Oxygen Index ASTM D-2863 |
22 |
| 1=No Effect / 2=Little Effect / 3=Affected / 4=More Affected / 5=Severely Affected |
| PHYSICAL PROPERTIES |
| Wall Thickness |
0.08 |
| Recommended Cutting |
Scissor |
| Stock Colors |
1 |
| Tensile Strength PSI ASTM D-2256 |
N/A |
| Tenacity (GM/Denier) ASTM D-4157 |
N/A |
| Specific Gravity ASTM D-792 |
N/A |
| Typical Elongation ASTM D-2256 |
N/A |
| Melt Point ASTM D-2117 |
410°F (374°C) |
| Maximum Continuous Mil-I-23053 |
N/A |
| Minimum Continuous |
N/A |
