Krimpa-Seal Heat Shrink Butt Splices and Ring Terminal Kits

Description of Krimpa-Seal Heat Shrink Butt Splices and Ring Terminal Kits

Part #: HS-NSPA

Repairing damaged wires instead of purchasing brand new wires for applications like car alarms, radios, A/C units and automobiles not only saves you money but also the hassle of going to purchase new wires and risking electrical shops not having stock. Krimpa-Seal Heat Shrink Butt Splices are just what you need to fix those torn wires so that your electrical devices function properly again.

These Splices are made of a transparent, polyolefin sleeve that enables you to check alteration prior to crimping with crimping tool and shrinking with heat gun resulting in excellent working cables. What makes these electrical connectors excellent for marine industries is that they bear an adhesive that is non-disturbing to electronic signs and seals the wires making them water and corrosion resistant. For identification purposes, these non-flame retardant connectors are classified by color and wire gauge labeled on the tubes.

Krimpa-Seal Heat Shrink Butt Splices and Ring Terminal Kits come with everything you need for all your industrial, marine, commercial or home applications.

For additional information and installation instructions, please click the More Information tab.

After receiving your order add a new product review here and receive 10% Off on your next order!!

Features and Benefits

Excellent for automotive, industrial, commercial and marine use
Saves you money and time
Transparent sleeve allows alterations to be checked prior to crimping and shrinking
Non-Corrosive
MIL-I-23053/4, Class 1
AMS 3634
UL File E-157227
Wire Gauge is labeled and color classified for simple verification
Adhesive seals wires making them water and corrosion resistant

Reviews



	[short_review]	[review_date]
Reviewed by:	[user_name] from [user_city].
[long_review]

Specifications

More Info

Heat Shrink Tubing

Typical Properties
Material	Multiple wall polyolefin tubing with meltable, integral inner wall
Applicable Specifications	MIL-I-23053/4, Class 1 AMS 3634 UL File E-157227
Physical
Temperature Rating	-55° to +110° F
Tensile Strength	2200 PSI
Longitudinal Change	1% - 10%

Electrical
Dielectric Strength	900 Volts/Mil
UL Voltage Rating	600 Volts

Chemical
Corrosion Resistance	Non-Corrosive
Fungus Resistance	Non-Nutrient
Water Absorption	< 0.1%

Military Specifications

Tubing Category		Polyolefin
Product Type		Melt
Product Type		Wall
Catalog Number		HIM
Military		MIL-I-23053/4
Specification		Class 1

Physical
Shrink Ratio		3:01
Shrink Temperature	Min.	+275°F/ +135°C
Operating Temperature	Min.	-67°F/ -55°C
Operating Temperature	Max.	+230°F/ +110°C
Flammability	Outer Jacket	Non-Flame Retardant
Flammability	Inner Wall	Non-Flame Retardant
Tensile Strength - psi		1500
Longitudinal Change		+1, -10%
Specific Gravity		0.99

Electrical
U/L recognized		–
CSA Certified		–
Dielectric Strength Volts per Mil		500
Volume resistivity OHMS-CM		1015

Chemical
Oil Resistance		Good
Acid Resistance		Good
Alkali Resistance		Good
Solvent Resistance		Good
Corrosion Resistance		Good

Krimpa-Seal™ Installation Instructions

Butt Connectors

Strip the wire 5/16 ".
Choose connector that meets the wire gauge and introduce the wire into the connector barrel.
Make sure the wire is correctly seated and crimp the connector using an insulated connector crimping tool nest that matches the color or gauge of the connector. Do not crimp the solder sleeve.
Repeat steps 1 thru 3 for opposite side.
Apply heat evenly around the length of the tubing (including the crimp area) from the center out to the ends until the tubing fully recovers and the adhesive flows. Remove from the heat and let cool for a SEALED connection.

Rings, Spades, & Slip-Ons

Strip the wire 5/16"
Choose connector that meets the wire gauge and insert the wire into the terminal barrel.
Make sure the wire is correctly seated and crimp the terminal barrel using an insulated connector crimping tool nest that matches the color or gauge of the terminal.
Apply heat evenly around the length of the tubing (including the crimp area) until the tubing fully recovers and the adhesive flows. Remove from the heat and let cool for a SEALED connection.

For Best Results:

Use a heat gun of at least 400° F
When using an open flame, do not isolate the flame on one area of the tubing
Spread the heat evenly
Overheating the connector may cause damage to the tubing
Rating: 105° C
600V maximum building wire
1000V maximum in signs and fixtures
Not for Multiple Wire Connectors

Contents of the Kits:

HS-NSPA-9002
Mini Kit

[20] 18-20 AWG Butt Connectors - Red
[20] 14-16 AWG Butt Connectors - Blue
[20] 10-12 AWG Butt Connectors - Yellow

Total: 60 pieces

HS-NSPA-5003-UL
Starter Assortment

[10] 10-12 AWG #10 Ring Stud
[10] 10-12 AWG Butt Connector
[10] 10-12 AWG 3/8" Ring Stud
[10] 18-20 AWG Butt Connector
[10] 18-20 AWG #10 Ring Stud
[10] 14-16 AWG Butt Connector
[10] 14-16 AWG #10 Ring Stud
[10] 14-16 AWG 1/4" Ring Stud
[10] 14-16 AWG 0.157" Female Bullet Receptacle
[10] 14-16 AWG 0.157" Male Bullet Receptacle
[10] 14-16 AWG 0.250" Female Bullet Receptacle
[10] 14-16 AWG 0.250" Male Bullet Receptacle
[1] Mini Torch
[1] Krimpa-Seal Ratcheting Tool (T-R-45)

Total Pieces: 122

HS-NSPA-1003-UL
Maintenance Assortment

[10] 18-20 AWG #6 Ring Stud
[10] 18-20 AWG #10 Ring Stud
[10] 14-16 AWG #8 Ring Stud
[10] 14-16 AWG #10 Ring Stud
[10] 14-16 AWG 1/4" Ring Stud
[10] 14-16 AWG 3/8" Ring Stud
[10] 10-12 AWG #8 Ring Stud
[10] 10-12 AWG #10 Ring Stud
[10] 10-12 AWG 1/4" Ring Stud
[10] 10-12 AWG 3/8" Ring Stud
[10] 18-20 AWG #10 Spade Stud
[10] 14-16 AWG #10 Spade Stud
[10] 10-12 AWG #10 Spade Stud
[15] 18-20 AWG Butt Connector
[25] 14-16 AWG Butt Connector
[15] 10-12 AWG Butt Connector
[10] 18-20 AWG 0.250" Female Tab Receptacle
[10] 18-20 AWG 0.250" Male Tab Receptacle
[10] 14-16 AWG 0.250" Female Tab Receptacle
[10] 14-16 AWG 0.250" Male Tab Receptacle
[10] 10-12 AWG 0.250" Female Tab Receptacle
[10] 10-12 AWG 0.250" Male Tab Receptacle
[10] 14-16 AWG 0.157" Female Tab Receptacle
[10] 14-16 AWG 0.157" Male Tab Receptacle
[5] Semi-Rigid Heat Shrink Tubing - 0.115" Diameter x 6" Long; Clear
[5] Semi-Rigid Heat Shrink Tubing - 0.245" Diameter x 6" Long; Red
[5] Semi-Rigid Heat Shrink Tubing - 0.245" Diameter x 6" Long; Blue
[5] Semi-Rigid Heat Shrink Tubing - 0.360" Diameter x 6" Long; Yellow
[1] Mini Torch
[1] Krimpa-Seal Ratcheting Tool (T-R-45)

Total Pieces: 287

Related Products

2:1 Heat Shrink Tubing (By the Foot)

Your Price: $0.40

2:1 Heat Shrink Boxed Kits (2.5'' & 4'')

Your Price: $10.99

3:1 Heat Shrink Tubing (Colors)

Your Price: $11.50

Micro-Therm MJ-600 Heat Gun

Your Price: $29.95

ELECTRIDUCT - A cable management company

Open to the public Toll Free number 1-866-673-9590

Recently Viewed Items