Recently Viewed Items

Clear this list

Newsletter

Middle Atlantic Overhead IDF Intermediate Distribution Rack


Middle Atlantic Overhead IDF Intermediate Distribution Rack Installation

Description of Middle Atlantic Overhead IDF Intermediate Distribution Rack

Scroll to Pricing

Mount your electronic equipment overhead with Middle Atlantic Overhead IDF Intermediate Distribution Racks. Constructed out of 16-guage and 18-gauge steel, the walls and door of this wall mount unit is built tough. Secured by factory installed locks and latches, designed with two 55 CFM exhaust fans, all encased components will be safe and properly ventilated. The bottom of this Middle Atlantic IDF enclosure is a removable aluminum plate, 17 1/2 x 8, for ease of access.

Versatile, multiple knockouts have been machined into the steel overhead mount cabinets to accommodate a number of equipment extensions, such as UHF/VHF antennas, dome cameras, and more. A power distribution unit with nine 15-amp outlets is included to provide energy for a number of devices. In addition, these Middle Atlantic IDF overhead mountable racks can be set up directly onto uni-strut beams or can be suspended in open area locations (threads not included).

Click the "Specifications" tab for product dimensions and the "More Information" tab for additional product data.


Review this item After receiving your order add a new product review here and receive 10% Off on your next order!!

Features and Benefits

  • Provides overhead mounting
  • Secured with factory installed solid locking and latched doors
  • Removable aluminum plate with multiple knockouts to accommodate different equipment
  • Welded 16-gauge steel sides, 18-GA door, and 11-GA rails
  • Two 55 CFM exhaust fans
  • EIA/TIA Complaint, UL listed and CSA listed
  • 4 integral gland grommets are built into the enclosure top to protect cables and reduce dust inside the enclosure
  • Black textured power coat finish
  • Available in 12U (21") and 16U (28")
  • Lifetime warranty from Middle Atlantic Products

Specifications


More Info


 Racking Width19" 
 Top16-gauge steel
 Sides, Bottom, Door18-gauge steel  
 Rackrails11-gauge steel  
 FinishBlack powder coat 
 Rackrails Tapped for10-32 mounting holes 
 Rack FansTwo 55 CFM installed at top 
 Power DistributionNine 15 AMP outlet included 
 Removable Plate17.5" x 8.0" (445 x 203mm), machined alunimum on bottom 
 Antenna KnockoutsEight for UHF/VHF on bottom 
 UL File#E313734 
 UL CategoryNWIN, NWIN17 
 Test StandardsUL 60950-1
CAN/CSA C22.2 No. 60950-03-1 

Pricing


Quantity
Payment methods
Secure server