Recently Viewed Items

Clear this list

Newsletter

Mille-Rod Non-Conductive Push Pull Rod Set


Mille-Rod Non-Conductive Push Pull Rod Set

Description of Mille-Rod Non-Conductive Push Pull Rod Set

Scroll to Pricing

Push-Pull rods are handy tools to have for installing cables through floors, walls, and ceilings. Millepede Cable management makes equipment for all three, known as the Mille-Rod Non-Conductive Push Pull Rod Sets. Made out of non-conductive, flexible polymer material, these cable shafts have a low-profile design to reduce snagging during installation and can bend around corners without breakinggreat for electrical applications. In addition, unlike metal tools, problems with electromagnetic and radio frequency interference is non-existent.

These Millepede push cable rods come in sets containing three main rods and various attachments. There is a glass-reinforced black rod, a semi-flexible polycarbonate red rod for slight bends, and a very flexible polycarbonate for working around sharp corners. If you have other Professional Mille-Rods, these Non-Conductive Push Pull Rod Sets will work with them.

For a complete list of the items in this kit, please click the "Specifications" tab.

For additional knowledge about the product, please click the "More Information" tab.


Review this item After receiving your order add a new product review here and receive 10% Off on your next order!!

Features and Benefits

  • Made with non-conductive materials for electrical applications
  • High-flexible polymer material allows for bending and turns without breakage
  • Kits come in 7 and 14ft lengths with a variety of standard attachments
  • Does not contribute to electromagnetic and radio frequency interference
  • Material will not rust or corrode for many years
  • Low profile design reduces snagging
  • Lifetime Guarantee

Specifications


More Info

14" Black Rigid Rods - Glass Reinforced Natural Nylon 6.6 Heat Stabilized
 Physical PropertiesUnit Test Method Values 
 Density g/m<ASTM-D792 1.58 
 Mechanical PropertiesUnit Test Method Values 
 Tensile Yield Strength MPaASTM-D638 265 
 Tensile Modulus MPaASTM-D790 17200 
 Elongation at Break %ASTM-D638 1.9 
 Flexural Strength MPaASTM-D790 420 
 Flexural Modulus MPaASTM-D790 15500 
 Notched Izod Impact Strength +25C j/mASTM-D256 450 
 Thermal PropertiesUnit Test Method Values 
 HDT at Load 1.8Mpa CASTM-D648 253 

14" Red Rods - Polycarbonate Resin
 PropertiesTest Method Terms Units S-3000 Low Viscosity 
 Physical Properties
 DensityISO-1183  g/cm 1.2 
 Water Absorption-- 23C, Underwater 0.24 
 
 Rhealogical Properties
 Melt Mass-flow Rate

ISO-1133 
-- g/10min16 
 Melt Volume-flow Rate --cm/10min16 
 Temperature300 
 Loadkg 1.2 
 Modular shrinkage (3.2mmt)
-- 
MD 

0.5-0.7 
TD
 
 Mechanical Properties
 Tensile Modulus



ISO 527-1, 527-2 





-- 

MPa 
2400 
 Yield Stress62
 Yield Strain
6.7 
 Nominal Strain at break119 
 Stress at 50% StrainMPa -- 
 Stress at Break-- 
 Strain at Break-- 
 Flexural Strength
ISO 178 

-- 

MPa 
94 
 Flexural Modulus2300 
 Charpy Impact Stremgth
ISO 179-1, 179-2 


23C 


kJ/m 
NB 
 Charpy Notched Impact Strength67
 Marking TemperatureISO 11357-3  -- 
 Glass Transition TemperatureISO 11357-2  -- 
 Temperature of Deflection under LoadISO 75-1, 75-2 1.80MPa 
124 
0.45MPa139 
 Vicat Softening TemperatureISO 306 -- -- 
 Coefficient of Linear Thermal ExpansionISO 11359-2 MD 
1/C 
6.5E-07 
TD6.6E-07 
  UL-94-- -- -- 
 FlammabilityUL-94 0.8mmt -- -- 
 FlammabilityUL-94 1.6mmt -- -- 
 
Electrical Properties
Relative PermittivityIEC 60250100Hz--3.1
1MHz
Dissipation FactorIEC 60250100Hz--0.0006
1MHz0.0090
Volume ResistivityIEC 60093--ohm-m3E+14
Surface Resistivtiyohm6E+15
Electric StrengthIEC 602431mmtMV/m31
2mmt--
3mmt18
Comparative Tracking IndexIEC 60112----275
Approvals------FDA Approved

Pricing


Quantity
Payment methods
Secure server