RowlCrown Classic PVC Crown Molding

Removable Crown Molding

Description of RowlCrown Classic PVC Crown Molding

Part #: SR-RC-CL4

This light weight flexible crown molding boasts a multi-purpose design serving aesthetically as well as for cable management function. With a 4 molding, this product is perfect for AV wire management, low voltage lighting and much more.

Rowl Crown molding comes in 2 pieces, Base (bottom piece) and Profile. The Base is flat with a hinge that allows the user to crimp or manually adjust the track for a tighter custom fit. This is especially useful for those sections where the wall and ceiling do not meet at a 90 degree angle.

The Profile (top piece) is designed with a classic crown molding form for aesthetic purposes and when assembled together with the base using a patented ball and socket design connection allows complete 100% removal for painting or relocating altogether.

Please click the "More Information" tab for installing crown molding instructions.

Click the "Specifications" tab for additional information.

NOTE: The product does NOT come with low voltage lighting.

*Small Room Box Kit - You can choose 8 accessories, please put in the special instructions box at checkout your choice and quantity.

After receiving your order add a new product review here and receive 10% Off on your next order!!

Features and Benefits

Light weight and flexible
This Extruded PVC is paintable
Heat resistant- will not expand and self extinguishing
Will not shrink or fade
Mildew and mold resistant
Easy installation
Nail Hole Free Top Profile – Finished look
Serves as accessible wiring conduit
Low Voltage Lighting Sold Separately

Reviews



	[short_review]	[review_date]
Reviewed by:	[user_name] from [user_city].
[long_review]

Specifications

More Info

1. Hold a corner piece in its respective corner, flush to the ceiling and trace a line with a pencil along the both sides on the wall as a point of reference. Do this in all corners of the room (or edges where using an end cap).

2.Measure the distance between the two lines on a given wall. This is the length of the base to be installed on that wall. It's better to measure slightly short than slightly long or else your corner pieces will not sit correctly.

TIP:This measurement doesn't have to be exact, since the base piece will be completely covered by the profile.

3.Cut base piece to size. For this part, the straightest most exact cut will be achieved by using a utility knife and T-square to score a line, and then gently flexing the base along the score line until it snaps. Alternatively, a heavy-duty scissor or tin snips may be also be used.

4.Gently crimp the track along the hinge to an inner angle of approximately 100. Be aware that crimping to 90 or less will cause gaping between the base and the ceiling and/or wall.

5. Position the base against the wall, equidistant from the measured marks. Push the hinge corner into the wall / ceiling corner. The hinge will allow for the base to fit snugly without any gaps along the wall and ceiling.

ELECTRIDUCT - A cable management company

Open to the public Toll Free number 1-866-673-9590

Recently Viewed Items