Silicone Rubber X-Treme Tape

Silicone Rubber X-TREME® Tape

Self Fusing Silicone Rubber X-Treme Tape

Description of Silicone Rubber X-TREME® Tape

Part #: TAPE-SRXT

Silicone Rubber X-Treme Tape is made from a special high quality silicone rubber compound that takes any shape to create a water and air tight insulating seal to protect from leaks, corrosion, and extreme temperatures.

This silicone tape stretches up to 3 times its length so you know your wrap is air tight after fusing.

Extreme environments are no match for this self-fusing wrap as it is resistant to UV rays, chemical and blazing temperatures reaching 500°F (260°C) making ideal for automotive, electrical, home, plumbing, and outdoor repairs. Because this tape uses no adhesives, no residue is left behind if removed.

Count on this adhesive-free insulation tape to repair everything without the need to replace entire parts saving you money in repair and labor costs.

For additional info, please click the More Information tab.

After receiving your order add a new product review here and receive 10% Off on your next order!!

Features and Benefits

Seals and secures against leaks and corrosion
Dielectric strength of 400 Volts per mil to provide insulation on wires, tools, and other electrical devices
MIL-I-46852 and ASTM D150 compliant
Contains no adhesive so there is no deterioration or breakdown, and no residue is left behind if removed
Allows you to fix or insulate anything regardless of dimensions
UV and Chemical resistant
Withstands temperatures reaching 500°F(260°C)
Tape edges won’t roll or collapse, for a solid and secure bond
Ideal for electrical insulation up to 400Volts/Mil
Stretches up to 3 times its length for an air and water tight fuse

Reviews



	Homeowner	8/11/2011
Reviewed by:	Fred from Texas.
X-Treme Tape is a great fix for Pool & Hot Tub water lines.

Specifications

More Info

Directions for use:

Clean surface to be wrapped, cut off length to be used
Peel back a short length of protective film, keep tape clean and dry
Begin to loop the tape onto itself so it overlaps by at least 50% of its width
Stretch X-Treme Tape® while continuing to wrap object with “half laps”, removing clear film as you go. For greater pressure resistance, use 2 or more tightly wrapped layers.
End of tape at final wrap should be complete positioned onto itself

Note: X-Treme Tape’s bond begins to cure immediately upon contact with itself. Repositioning or removal is not recommended after 2 minutes of wrapping.
X-Treme Tape will form a permanent, cohesive bond within 24 hours at room temperature…faster if heat cured at up to 350°F

Store in a cool dry place in a sealed plastic container.

OPERATING TEMPERATURE RANGE
CONTINUOUS
Centigrade	-45°C to 200°C
Fahrenheit	-49°F to 392°F
INTERMITTENT
Centigrade	-65°C to 260°C
Fahrenheit	-85°F to 500°F
PROPERTIES	TEST METHOD	PERFORMANCE
SPECIFIC GRAVITY	ASTM D792	1.2
HARDNESS, DUROMETER, SHORE A	ASTM D2148	--
ROOM-CURED; 24 HOURS	--	50
CURED @ 300°F; 24 HOURS	--	70
CURED @ 480°F; 24 HOURS	--	75
TENSILE STRENGTH	ASTM D119	600 PSI
ELONGATION	ASTM D119	300 %
TEAR STRENGTH	ASTM D624, Die B	85 PPI
BOND STRENGTH	MIL-I-46852	2 lbs
ADHESION	ASTM D2148	3"
COLD BRITTE POINT	ASTM D746	-65°C
WATER ABSORPTION	MIL-I-46852	3%
DIELECTRIC STRENGTH	MIL-I-46852	400 UPM
DIELECTRIC CONSTANT	ASTM D150	2.95
DISSIPATION FACTOR	ASTM D150	< 0.0004
VOLUME RESISTIVITY	MIL-I-46852	3 x 1014

ELECTRIDUCT - A cable management company

Open to the public Toll Free number 1-866-673-9590

Recently Viewed Items