Features and Benefits
- Simple one button test
- Tests 5 types of cables: RJ-45, RJ-11, BNC, 1394 and USB
- Tests shielded (STP) or Unshielded (UTP) LAN Cables
- Tests Shields in 1394 and USB Cables
- High or Low Pitch Tracer Tone
- Fast or Slow LED sequencing
- Local or Remote Test Mode on Receiver
- LEDs Indicate Connections and Faults
- Built-in Battery Test
- 600 ft test distance (RJ-45 / RJ-11 / BNC)
- Remote Attaches to Main Unit
- Tests Installed Wiring or Patch Cables
- Ergonomic, Portable Handheld Design
- Comes complete with padded, cordura carrying case, 9 volt battery and instruction manual
Reviews
|
|
|
[short_review]
|
|
[review_date]
|
|
Reviewed by:
|
[user_name] from [user_city].
|
| [long_review] |
More Info
| Technical Specifications |
| Cables Tested: |
- UTP and STP LAN cables terminated in RJ-45 male connectors (EIA/TIA 568)
- RJ-11 cables with make connectors, 2 to 6 conductors installed
- 1394 Cables with Type 1 plugs on both ends
- USB cables with Type A "flat" plug on one end and Type B "square" plug on other end
- BNC cables with male connectors
|
| Faults Indicated: |
No Connection, Shorts, Opens, Crosses |
| Low Battery Annunciation: |
LED lights to indicate low battery |
| Case Dimensions (w/ Remote): |
7.25L x 4.0W x 1.0H inches
18.4L x 10.2W x 2.5H cm |
| Weight (without battery): |
202 grams, 0.445 lbs |
| Battery: |
1 standard 9 volt alkaline battery, Triplett Part Number 37-48 |
-
The Triplett Wiremaster XR 5 Cable Tester is intented to test cables with straight through connections
- It is NOT intended to test cables with reversed or transposed connections linke some LAN crossover cables or reverse wired telephone cables
- Initial use, remember to run twice:
- first pass is to calibrate tester;
- Second pass identifies the circuit
|
