The ultimate in portability, electric powered hand carry pressure washers work great for all your light-duty needs. Sidewalks, car washes, patio and deck cleaning are done in a breeze because these economical machines shoot water at an impressive 1450 - 1500 PSI.
Look at the chart below to see which model comes with:
Hand Carry Pressure Washer Models |
PW-CW-HCE-1500A |
PW-CW-HCE-1500ADE |
PW-CW-HCE-1500ADS |
PW-CW-HCE-1500 |
- 1450 [email protected] 2 GPM and @ 2 HP
- Triplex plunger pump with ceramic plungers and stainless steel valves
- 35' Power cord with ground fault interrupter for operator safety
- 26' Non-marking pressure hose
- Adjustable pressure
- Chemical Injection
- Thermal Relief Valve - mechanical: opens the valve to release hot water
- Trigger Gun
- 35" Two piece wand
- Multi-reg zero to sixty degree pattern tip with Hi-Low for chemical injection
|
- 1450 [email protected] 2 GPM and @ 2 HP
- Triplex plunger pump with ceramic plungers and stainless steel valves - will handle water up to 180°F
- 35' Power cord with ground fault interrupter for operator safety
- 26' Non-marking pressure hose
- Adjustable pressure
- Chemical Injection
- Thermal Relief Valve - mechanical: opens the valve to release hot water; electrical cut-out: motor shuts down in order to protect pump
- Trigger Gun
- 35" Two piece wand
- Multi-reg zero to sixty degree pattern tip with Hi-Low for chemical injection
|
- 1450 [email protected] 2 GPM and @ 2 HP
- Triplex plunger pump with ceramic plungers and stainless steel valves - will handle water up to 180°F
- 35' Power cord with ground fault interrupter for operator safety
- 26' Non-marking pressure hose
- Adjustable pressure
- Chemical Injection
- Thermal Relief Valve - mechanical: opens the valve to release hot water
- Trigger Gun
- 35" Two piece wand
- Multi-reg zero to sixty degree pattern tip with Hi-Low for chemical injection
|
- 1500 [email protected] 3 GPM and @ 3 HP
- Triplex plunger pump with ceramic plungers and stainless steel valves
- 35' Power cord with ground fault interrupter for operator safety
- 26' Non-marking pressure hose
- Adjustable pressure
- Chemical Injection
- Thermal Relief Valve
- Trigger Gun
- 35" Two piece wand
- Multi-reg zero to sixty degree pattern tip with Hi-Low for chemical injection
- Optional pumps handle water up to 180°F
|
Click the "More Information" tab for Additional data.
