Designed to cut most synthetic fabric and ropes, this bench mount hot knife has a cutting temperature over 900°F to easily and cleanly cut without leaving excess material behind.
Great for industrial and DIY applications, the bench mount rope cutter will help cut and seal precise ends, while preventing fraying.
The powerful 80W unit can heat up to max operating temperature in about 1-2 minutes.
- Voltage: AC 110-130V | 60HZ
- Power: 80W
- Cutting Temp: Approx 500°C (932°F)
- Dimensions: 7.5"L x 5.125"W x 6.25"H
- Cutting Blade Surface: 3"
- Power Cord Length: 4 Feet
Used for cutting synthetic rope materials like nylon, polyvinyl chloride, vinyl nylon, polyester, polypropylene, polyurethane, etc...
Attention: Performance varies based on material and diameter of rope. Proper operation and maintenance should be followed for maximum performance. Follow units instruction manual before use. If blade does not heat up and unit is on, make sure blade screws are clean and tight.