This manual reset in-line GFCI can be added to or replace a GFCI plug on any power tool or equipment power cord.
The user can wire to both the line and load side. The included hardware can be used to wire cord gauge 12/3 SJTW.
The bright “Red” light indicates when the power is “ON”.
The TEST and RESET buttons allow for periodic testing.
- Compatible with 15 and 20 amp U-ground outlets and plugs, 2 or 3 wire
- User can wire both line and load sides
- Trip level 4-6 mA
- UL and CUL listed
- Manual reset
- Rated for indoor and outdoor use
