Electriduct Manual Stainless Steel Cable Tie Self Tensioning and Cutting Tool

This simple design Stainless Steel Cable Tie Tool offers robust construction which allows easy maintenance and long operational life.

The self-tensioning tool is hand powered, so tightening the stainless steel tie to your desired tension is achieved by simply squeezing and holding the handle. When you are satisfied with the tension, use the cutting lever to cut the cable tie. Due to the design and cutting angle, if done properly, this tool will not leave any sharp edges. After releasing the handle, the self return spring will bring the tool back into position for the next cable tie.

Suitable for stainless steel cable ties with a width up to 12mm and 0.3mm thick, just make sure you have at least 1.75" lead for the tool to grab the cable tie for use.

• Metal Construction
• Ergonomic TPR Handles for Comfort
• Works on ties up to: 0.3mm thick x 12mm wide (needs 1.75" lead to grab and hold)
• Easy to operate: Self-Tensioning, Manual Cutting Lever
• Clean cuts, no sharp edges

Measurements are approximate.