Used in applications where you want to protect against moisture, our marine grade heat shrink when installed correctly will create a waterproof seal.
The durable dual wall tubing material offers exceptional wear protection and resistant to fluids and chemicals.
A layer of glue on the inside of the heat shrink tube, when heated will liquefy to create an air-tight seal for long-lasting insulation.
- Shrink Ratio: 3 to 1
- Working temperature:-55°C~+105°C
- Breakdown strength:ASTM D2671 =15KV/mm
- Tensile strength:ASTM D2671 =10.4MPa
- Flammability: VW-1
- Certification: ROHS
Attention: Sizes are approximate, and will vary by a few percent.
